Recommended sag at the shock is 18-20 mm. This equates to 28-30% sag. This link does not require excess amounts of sag to achieve small bump sensitivity. Please set your sag at around 19 mm at the shock and let the link do its work. The spring rates and shock pressures below should get you close to the right sag but you might have to deviate from them here and there.
| Weight (lbs) | Spring rate (lbs/in) | Float X2 Pressure (psi) |
| 120 | 375 | 150-160 |
| 140 | 425 | 165-175 |
| 160 | 475 | 180-190 |
| 180 | 525 | 195-205 |
| 200 | 575 | 210-220 |
| 220 | 625 | 225-235 |
| 240* | 675 | 240-260 |
| 260* | 265-275 | |
| 280* | 280-290 | |
| 300* | 295-300 | |
| * You may be at or above the weight limit of your frame. Please check Specialized's structural weight limits. S-Works and Pro carbon frames have a lower weight limit than Exper carbon and Comp carbon frames. All of which have a lower weight rating than an alloy frame. | ||